Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 52

PRESCRIBE Command Reference BOX - draw BOX Format BOX width, depth[, option]; Parameters width: width of the box depth: depth of the box option: B = Leave the cursor unmoved (Default) H = Move the cursor to the horizontally adjacent corner V = Move the cursor to the vertically adjacent corner E = Move the cursor to the diagonally opposite corner L = Move the cursor one line down N = Move the cursor to the beginning of the next line N-option Left margin B-option (No motion) L-option V-option H-option E-option Function The BOX command draws a box of a specified size with one corner at the current cursor position. The line thickness is designated by the SPD (set pen diameter) command. The size and thickness is measured on the basis of value established in the UNIT command. The cursor is moved as specified by the option. If the option is omitted, the cursor is not moved (same as option B). The BOX command draws only the outline of the box. To fill in the box, use the BLK command. The width and depth may use either a positive or negative value. File !R! RES; UNIT C; SPD .1; SLM 2; 42