Samsung SPH-M920 User Manual (user Manual) (ver.f6) (English) - Page 76

Note: By default, the Use incoming call volume for notifications field is active, in this case, the Notification slider is not accessible until it is disabled. Tip: You can adjust the ringer volume in standby mode (or the earpiece volume during a call) by using the volume button on the left side of your device. Vibrate To set your device to vibrate for incoming calls and silent for notifications: ᮣ Press the volume button down in standby mode until you see on the screen. To set your device to always vibrate for incoming calls: 1. Press > display. and tap > Sound & 2. Tap Phone vibrate. (If you have already checked the option, tapping it again deselects the option.) To set your device to vibrate while using the dialpad and making onscreen selections: 1. Press > display. and tap > Sound & 2. Tap Haptic feedback. (If you have already checked the option, tapping it again deselects the option.) Silence All The Silence All option allows you to mute all sounds without turning your device off (except for Media volume). To activate Silence All: ᮣ Press and hold the volume button down in standby mode until you see on the screen. To deactivate Silence All: ᮣ Press the volume button up repeatedly to select a volume level. To set your device to silent mode: 1. Press > display. and tap > Sound & 62 2C. Settings