Toshiba 47L6200U User Guide - Page 34
Connecting a digital audio system, If you cannot locate the device's infrared sensor, POWER
View all Toshiba 47L6200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
34 Connecting Your TV Connecting a digital audio system Point the TV remote control toward the front of the TV and press the button for the desired function. The signal passes from the remote control through the TV to the device via the IR Blaster cable. For more information, see "IR Blaster Setup" on page 55. (Sample Illustration) Controlling the device(s) - remote control NOTE The IR pass-through feature does not support all IR controlled devices. Satisfactory quality may not be attainable with certain devices. If you cannot locate the device's infrared sensor: 1 Turn off the device. 2 Starting at the device's lower-left corner, place the end of the device's remote control (with the infrared emitter) so it touches the front of the device. Press the POWER button. (Do not use the TV's remote control for this step.) 3 If the device turns on, the sensor is located where the remote control touched the device. 4 If the device does not turn on, move the remote control slightly to the right and press the POWER button again. 5 Repeat the previous steps if necessary. Connecting a digital audio system The TV's Digital Audio Out terminal outputs a Dolby® Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for