Asus SCSI 320-0 Global Array Manager Transition Tool - Page 94
Windows NT Users, Client System Requirements, Components, Power Console Plus Client
View all Asus SCSI 320-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Overview, Continued Windows NT Users With some older firmware, you must use one logical drive if you have only one MegaRAID adapter in the host system. Most firmware requires only an attached device. If you have more than one MegaRAID adapter, make sure at least one physical drive is attached to each MegaRAID adapter before you access these MegaRAID adapters from Power Console Plus in Windows NT. You can alleviate this problem by attaching and configuring at least a non-disk SCSI device to each MegaRAID adapter. You can configure these logical drives using MegaRAID Configuration Utility. Client System Requirements Client systems running Power Console Plus must: • be running Windows NT or Windows 2000 • have an Intel Pentium or higher CPU • have at least 8 MB of system memory • have a network interface • have a 3.5" floppy disk drive • have at least 2 MB of free hard disk drive space • have a mouse or other pointing device • must be using the TCP/IP protocol Components The Power Console Plus package consists of: • Power Console Plus • MegaService Monitor • SNMP Agent • the registration server • the RAID server Power Console Plus Client Any computer running Windows NT or Windows 2000 can run Power Console Plus. Running Power Console Plus allows this computer to access any RAID server that is registered in the Registration Server. Registration Server The Registration Server contains a database of all computers that have registered as a RAID Server. RAID Server The RAID Server software runs in any server that has one or more MegaRAID controllers and allows it to register to the Registration Server. 86 MegaRAID Configuration Software Guide