Brother International PR-620 Users Manual - English - Page 142

■ Trimming the threads between characters If the machine is set to trim the threads between the characters, the jumpstitches between the characters are reduced and any other necessary procedures after embroidering are reduced. However, the embroidering time will increase if the threads are trimmed between each of the characters. If necessary, specify that the threads be 3 trimmed between characters. Touch so that it changes to . • Each touch of the key turns the setting either on or off. Changing the thread density (only for some character and frame patterns) The thread density for some character and frame patterns can be changed. A setting between 80% and 120% in 5% increments can be specified. Touch . 1 Threads are not trimmed. Threads are trimmed. If necessary, touch the arrow keys to adjust 4 the position of the pattern. For more details, refer to page 120. After making the desired changes, touch 5 . X The pattern editing screen appears again. X The screen shown below appears. 5 1 Selects a less thread density 2 Selects a more thread density 3 Touch this key to close this screen. ■ Selects a less thread density Less Standard ■ Selects a more thread density More Less Standard More Editing the Embroidery Pattern (Pattern Editing Screen) 125