Brother International PR-620 Users Manual - English - Page 203

APPENDIX Align the holes on the embroidery frame holder 6 with the pins in the frame-mounting plate of the carriage. Additional digitizing information When creating a pattern for embroidering with a cap frame, pay attention to following points in order to avoid registration problems (misalignment of gaps in the pattern). Sew underlay stitches. 1 1 Pins in the frame-mounting plate 2 Holes on the embroidery frame holder Secure the embroidery frame holder with the two 7 thumb screws. Start the embroidery pattern from the center, 2 and sew toward the ends. With the machine, the order in which patterns are selected when they are combined is the order in which they will be sewn. For the following example, select the patterns in the order "E"→"A"→"B"→"R" to make the combined pattern "BEAR". 1 Use the thumb screws included with the machine (thumb screws removed in step 1 on page 171). CAUTION ● Using the disc-shaped screwdriver included, firmly tighten the thumb screws. Incorrect sewing order Correct sewing order Note ● Do NOT sew from one end to the other, otherwise wrinkling or shrinking may occur. 186