Brother International PR-620 Users Manual - English - Page 24

Setup location Setup the machine in a location that meets the following requirements. • Position machine more than 50 mm (2 inches) from the wall • Allow sufficient space around the machine • Place no objects within the moving range of the embroidery frame • Set-up machine near an electrical outlet • Use a level and stable surface, such as a desk • Use a surface that can support the weight of the machine (about 37 kg (81 Ibs.)) • Allow open space around the ventilation slots at the bottom toward the back 1 More than 50 mm (2 inches) 770 mm (30-5/16 inches) 589 mm (23-3/16 inches) More than 350 mm (13-3/4 inches) More than 512 mm 250 mm (20-5/32 inches) (9-7/8 inches) More than 250 mm (9-7/8 inches) CAUTION ● In order to prevent malfunctions or damage, do not set up the machine in a location exposed to the following conditions. Direct sunlight Liquids, such as water Extreme dust Blocked ventilation slots Objects within the moving range of the embroidery frame Insufficient space Connection to extension cords or multiple adapters An unstable surface Extremely high or extremely low temperatures (The operating environment should be between 5 °C (40 °F) and 40 °C (104°F) Note ● For your safety: Since the machine weighs approximately 37 kg (81 lb.), do not set it up on an unstable table or desk. Setting Up the Machine 7