Brother International PR-620 Users Manual - English - Page 195

APPENDIX Close the clamping frame, and then hook the 6 catch of the snap lock to temporarily secure it. Memo ● According to the shape of the cap, loosen the screw 4 and adjust the position of the clamping frame 3 so that the teeth on the inside of the clamping frame 1 align with the base of cap brim 2. 1 Catch of the snap lock 2 Clamping frame Check for the following conditions. 1 The centerline of the cap is parallel with the short side of the clamping frame. 2 The line on the left side of the cap cannot be seen within the clamping frame. 3 The teeth on the inside of the clamping frame cleanly grab the base of the brim. 4 The centerline of the brim holder and the center line of the cap must make a single straight line. 4 3 1 2 1 Teeth on the inside of the clamping frame 2 Centerline of brim holder Memo ● If the cap fabric is thick and the clamping frame cannot be closed, or if the fabric is thin and the cap is too loose within the frame, adjust the clamping frame. 178