Brother International PR-620 Users Manual - English - Page 187
Types of caps
View all Brother International PR-620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
APPENDIX Types of caps With the machine, we recommend that the following types of caps be embroidered. ■ Standard(Pro Style) Face: Pro style 6 sections ■ Golf Style Face: Not divided 5 sections Otto International, Inc. cap model number (Example) Mesh backing on the back of front panels (soft or hard) Ease of framing (hooping) Backing OTTO27-007 Constructed Unconstructed firm front soft crown Easy (Recommended) Fairly easy 1 to 2 ply 2 to 3 ply ■ Low Profile (Low fitting) Face: Low fitting 6 sections Otto International, Inc. cap model number (Example) Mesh backing on the back of front panels (soft or hard) Ease of framing (hooping) Backing OTTO23-225 Constructed firm front Fairly easy 1 to 2 ply Memo ● Check if this area 1 is covered with mesh. Otto International, Inc. cap model number (Example) Mesh backing on the back of front panels (soft or hard) Ease of framing (hooping) Backing OTTO23-225 Constructed firm front Very difficult (because the cap material very hard.) 1 to 2 ply OTTO18-203 Unconstructed soft crown Fairly easy 2 to 3 ply Note ● There is no centerline that can be used as a guide for placing the cap in the cap frame. Before framing the cap, use a charcoal pen to mark the centerline. 170