Brother International PR-620 Users Manual - English - Page 146

Editing the Embroidery Pattern (Embroidering Settings Screen) In the embroidering settings screen, a single pattern can be edited if patterns were not combined or an entire combined pattern can be edited as a single pattern. In addition, the arrow keys can be used to move the pattern in the pattern editing screen or move the embroidery frame in the embroidering settings screen. Touching these keys moves the embroidery frame. Rotating the entire pattern The entire pattern can be rotated. Touch . 1 If necessary, touch the arrow keys to adjust 3 the position of the embroidery frame. For more details, refer to page 72. If necessary, touch 4 embroidering area. to check the For more details, refer to page 32. After making the desired changes, touch 5 . X The embroidering settings screen appears again. X The screen shown below appears. 1 Enables the entire pattern to be rotated. 2 Enables the embroidery frame to be moved. 3 Enables the embroidering area to be checked. 4 Touch this key to close this screen. Touch the keys to adjust the pattern to the 2 desired angle. For more details, refer to page 122. Memo ● If is touched to return to the pattern editing screen after the entire pattern is rotated, the pattern appears as it did before the rotation angle was specified, but the setting is not cancelled. When the embroidering settings screen is displayed 5 again, the pattern appears with the rotation angle applied. However, if an error occurs, for example, if the pattern is enlarged in the pattern editing screen so that it extends out of the embroidering area when it is rotated, the following error message appears. 1Touch to return to the pattern editing screen so that the pattern can be re-edited. Editing the Embroidery Pattern (Embroidering Settings Screen) 129