Brother International PR-620 Users Manual - English - Page 39

EMBROIDERING TUTORIAL Screen overview The basic operation flow is shown below. In the pattern type selection screen, select a pattern type. (Refer to page 23, 50) 1 Touch this key to continue to the pattern editing screen. This key is not available unless a pattern type is selected. In the pattern list screen, select the pattern. (Refer to page 23, 51) 1 Touch this key to return to the pattern type selection screen. 2 Touch this key to continue to the pattern editing screen. In the pattern editing screen, edit the pattern. (Refer to page 25, 52) 1 Touch this key to return to the pattern type selection screen and add another pattern. 2 Touch this key to continue to the embroidering settings screen. In the embroidering settings screen, if it is a combined pattern , edit the entire pattern, specify the embroidering settings and check the embroidery area. (Refer to page 26, 54) 1 Touch this key to quit the current operation and return to the pattern type selection screen. 2 Touch this key to return to the pattern editing screen. 3 Touch this key to continue to the embroidering screen. In the embroidering screen, check the thread colors assigned to the needle bars, and then install the upper threads.Touch the unlock key so that the start/stop button starts flashing in green and the embroidery machine is ready to begin sewing. After the embroidery is sewn, the embroidering settings screen appears. (Refer to page 33, 56) 1 Touch this key to return to the embroidering settings screen. 22