Brother International PR-620 Users Manual - English - Page 148

The size of the pattern is displayed after a key is touched to change it. Changing the colors of the pattern The colors of the pattern can be changed and previewed in the screen. The function and operation for this key is the same as that for the change thread color key in the pattern editing screen. 1 Repeat spacing (vertical) 2 Repeat spacing (horizontal) • To quit repeating the pattern and return it to its original arrangement, touch so that it changes to . If necessary, touch the arrow keys to adjust 4 the position of the embroidery frame. For more details, refer to page 72. If necessary, touch 5 embroidering area. to check the For more details, refer to page 32. After specifying the desired repeat settings, 6 touch . X The embroidering settings screen appears again. Touch . 1 X The change thread color screen appears. Memo 5 ● If is touched to return to the pattern editing screen after specifying repeat settings, the pattern appears as it did before the repeat settings were specified, but the settings are not cancelled. When the embroidering settings screen is displayed again, the pattern appears with the repeat settings applied. However, if an error occurs, for example, if the pattern is enlarged in the pattern editing screen so that it extends out of the embroidering area when it is repeated, the following error message appears. For details on changing the colors, refer to 2 page 127. Memo ● Even if is touched to return to the pattern editing screen after colors are changed, the settings are not cancelled. 1Touch to return to the pattern editing screen so that the pattern can be re-edited. Editing the Embroidery Pattern (Embroidering Settings Screen) 131