Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 124

4 Fax Fax Procedure This section describes the basic fax procedures. The following shows the reference section for each procedure. Step 1 Loading Documents ...124 Step 2 Selecting Features ...126 Step 3 Specifying Destinations 127 Step 4 Starting the Fax Job ...128 Step 5 Confirming the Fax Job in Job Status 129 Step 1 Loading Documents The following two methods are available to load documents: Document Feeder • Single sheet • Multiple sheets Document Glass • Single sheet • Bound documents, such as books Document Feeder The document feeder supports single and multiple sheet documents with sizes from 125 x 85 mm (Standard size: A5, A5 ) to 216 x 600 mm (long) (Standard size: A4, 8.5x 14"). The document feeder automatically detects documents of standard-size widths. Note • The minimum supported paper size for 2-sided copying: 125 x 110 mm (Standard size: A5, A5 ). The standard document sizes that can be detected automatically depend on [Paper Size Settings] in the System Administration mode. For information on [Paper Size Settings], refer to "Paper Size Settings" (P.309). The size on the left is detected as the size shown on the right as follows. Original Document Size 8-inch width document Document Size Detected by the Document Feeder B5 width document The document feeder accepts the following number of sheets. Document Type (Weight) Lightweight paper (38 - 49 gsm) Plain paper (50 - 80 gsm) Heavyweight paper (81 - 128 gsm) Number of Sheets 110 sheets 110 sheets 75 sheets Note • To avoid paper jams, use the document glass for folded or wrinkled documents, cut-and-pasted documents, curled paper, or back carbon paper. • The lightweight paper of 38 - 49 gsm cannot be scanned 2 sided. 1 Remove any paper clips and staples before loading the document. 124