Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 419
Configuration on the Machine, Select [Internet Services HTTP], and then select [Change Settings].
View all Dell C5765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 419 highlights
Installation of Dell Printer Configuration Web Tool Configuration on the Machine The following describes the configuration procedure for using Dell Printer Configuration Web Tool on the machine. 1 Display the [Tools] screen. 1) Press the button. 2) Enter the system administrator's user ID with the numeric keypad or the keyboard displayed on the screen, and select [Enter]. When a passcode is required, select [Next] and enter the system administrator's passcode, and then select [Enter]. Note • The default user ID is "admin". • The default passcode is "1111". 3) Select [Tools] on the [Home] screen. 4) Select [System Settings]. 2 Enable the Internet Services (HTTP) port on the machine. 1) Select [Connectivity & Network Setup]. 2) Select [Port Settings]. 3) Select [Internet Services (HTTP)], and then select [Change Settings]. 4) Select [Port Status], and then select [Change Settings]. 5) Select [Enabled], and then select [Save]. 6) Select [Close] repeatedly until the [Tools] screen is displayed. 3 Set an IP address. If an IP address is already set, you can skip this step. For an environment with DHCP or BOOTP, configure the method for obtaining the address. If an IP address cannot be obtained automatically or manual configuration is preferred, confirm the settings of an IP address, a subnet mask, and a gateway address. For information on how to set an IP address, refer to "Protocol Settings" (P.328). 4 Select [Close] repeatedly until the [Tools] screen appears. 5 Select [Close]. Note • Rebooting the machine may be required depending on the settings. When a message displayed on the screen, follow the message and reboot the machine. 6 After the machine reboots, you can print out a configuration report to confirm that the port for Dell Printer Configuration Web Tool is enabled and TCP/IP is set up correctly. For information on how to print a configuration report, refer to "Print Reports" (P.260). 7 Start Dell Printer Configuration Web Tool to confirm whether the service is available or not. For information on how to start Dell Printer Configuration Web Tool, refer to "Starting Dell Printer Configuration Web Tool" (P.420). 419