Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 453

Configuration of Store to Folder Configuration of Store to Folder This section describes configuration procedures to use the Store to Folder service on the machine. The following shows the reference section for each procedure. Step 1 Enabling Port and Setting up TCP/IP 453 Step 2 Registering a Folder ...454 Step 3 Configuring a Computer 454 Step 1 Enabling Port and Setting up TCP/IP To use Network Scanner Utility 3 (Scan Driver and Stored File Manager 3), which supports WebDAV protocol, enable the WebDAV, SNMP, and SOAP ports and set up an IP address. Note • You can configure the settings using Dell Printer Configuration Web Tool. For information on how to use Dell Printer Configuration Web Tool, refer to "Configuring Machine Settings Using Dell Printer Configuration Web Tool" (P.421). 1 Display the [Tools] screen. 1) Press the button. 2) Enter the system administrator's user ID with the numeric keypad or the keyboard displayed on the screen, and select [Enter]. When a passcode is required, select [Next] and enter the system administrator's passcode, and select [Enter]. Note • The default user ID is "admin". • The default passcode is "1111". 3) Select [Tools] on the [Home] screen. 2 Enable the ports. 1) Select [Connectivity & Network Setup]. 2) Select [Port Settings]. 3) Select [SNMP], and then select [Change Settings]. 4) Select [Port Status], and then select [Change Settings]. 5) Select [Enabled], and then select [Save]. 6) Select [Close]. 7) Select [SOAP], and then select [Change Settings]. 8) Select [Port Status], and then select [Change Settings]. 9) Select [Enabled], and then select [Save]. 10) Select [Close]. 11) Select [WebDAV], and then select [Change Settings]. 12) Select [Port Status], and then select [Change Settings]. 13) Select [Enabled], and then select [Save]. 14) Select [Close] repeatedly until the [Tools] screen is displayed. 453