Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 335
Authentication System Setup, Kerberos Server Settings, Primary Server - Port Number
View all Dell C5765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 335 highlights
Connectivity & Network Setup Authentication System Setup Authentication System Allows you to select the authentication system from [Kerberos (Windows 2000)], [Kerberos (Solaris)], [LDAP], [SMB], and [Authentication Agent]. After you change the authentication system, personal folders and personal sheets used with the previous authentication system are not deleted automatically. If these folders or job flow sheets are no longer needed, delete them from the machine. If the same user IDs are also used on the new authentication system, personal folders and personal job flow sheets can be used by the same users. Server Response Time-Out Set the server time-out response between 1 and 75 seconds in 1 second increments. Search Time-Out Set the user information search time-out between 1 and 120 seconds in 1 second increments. Kerberos Server Settings Configure the Kerberos Servers 1 to 5. The settings in [Kerberos Server 1 (Default)] will be the default settings for authentication. Primary Server Name/Address Enter the primary server name or IP address. Note • For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255. • For IPv6, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a hexadecimal value. Primary Server - Port Number Set the primary server port number from 1 to 65535. The default value is 88. Note • Do not use the numbers assigned to the other ports. Secondary Server Name/Address Enter the secondary server name or IP address. Note • For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255. • For IPv6, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a hexadecimal value. Secondary Server - Port Number Set the secondary server port number in the range from 1 to 65535. The default value is 88. Note • Do not use the numbers assigned to the other ports. Domain Name When you use Active Directory of Windows Server® 2003, Windows Server® 2008, or Windows Server® 2012 as server, specify the domain name of Active Directory in [Domain Name]. Up to 64 characters are allowed. Note • Enter a realm name in uppercase characters. Otherwise, an authentication error occurs. 335