Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 328

15 Tools SOAP Port Status Select [Enabled] when you use an application program. Port Number Enter a port number for SOAP from 1 to 65535. The default value is 80. Note • If the default port number is used, it may conflict with other ports. Make sure to set up the port number that is not in use. WebDAV Port Status Select [Enabled] when you use an application program such as Network Scanner Utility3 to access folders in the machine. Note • You cannot select [Port Number] and [Operation Time-Out], if WebDAV port is disabled. To configure [Port Number] and [Operation Time-Out], enable port status and reboot the machine, and then configure [Port Number] and [Operation Time-Out]. Port Number Enter a port number for WebDAV from 1 to 65535. The default value is 80. Note • If the default port number is used, it may conflict with other ports. Make sure to set up the port number that is not in use. Operation Time-Out You can enter an operation time-out period between 1 and 65535 seconds in 1 second increments. ThinPrint Port Status You can use the machine for print in the ThinPrint .print environment. The machine decompresses and prints the compressed print data sent from the print server. Select [Enabled] when you use ThinPrint®. Port Number Enter a port number for ThinPrint from 1 to 65535. The default value is 4000. Note • Do not use any numbers assigned to the other ports. • ThinPrint is available when the communication protocol uses IPv4. • The maximum of three connections are possible at a time. Protocol Settings Set the parameters required for communications. In [Protocol Settings], you can set the following items. Ethernet Rated Speed Set the communication speed for the Ethernet interface. 328