Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 565
Unable to create a Transmission Report - Job Undelivered or a Transmission Report
View all Dell C5765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 565 highlights
Status Code Status Code 016-709 016-711 016-712 016-713 016-714 016-715 016-716 016-717 016-718 016-719 016-720 016-721 Cause and Remedy [Cause] An error occurred during print processing. [Remedy] Contact Customer Support at dell.com/contactdell. [Cause] The upper limit for the e-mail size has been exceeded. [Remedy] Take one of the following measures, and then try sending the mail again. • Reduce the number of pages of the document. • Lower the resolution with [Resolution]. • Reduce the magnification with [Reduce / Enlarge]. • Ask your system administrator to increase the value set for [Maximum Total Data Size]. • For color scanning, set [MRC High Compression] to [On] under [File Format]. [Cause] Unable to process the document because the specified scan area is too small. [Remedy] Increase the resolution or scan area. [Cause] The passcode entered does not match the passcode set on the folder. [Remedy] Enter the correct passcode. [Cause] The specified folder does not exist. [Remedy] Create a new folder or specify an existing folder. [Cause] The machine failed to access the ESCP form because the password of the ESCP form does not match. [Remedy] Enter the correct password of the ESCP form. [Cause] Unable to spool TIFF file because of insufficient hard disk space. [Remedy] Delete unnecessary files and users from the hard disk. Refer to "Printing and Deleting Stored Jobs" (P.182) [Cause] Unable to create a Transmission Report - Job Undelivered or a Transmission Report because the transmission result information required for creating the report is not stored in the machine's memory. [Remedy] Take one of the following measures: • If many scan documents are being processed, wait until the jobs are completed to execute a new job. • After completing the job that you want to confirm in a report, do not execute 200 or more jobs before printing the report. [Cause] Unable to process the PCL print data because of insufficient memory. [Remedy] Reduce the resolution, or cancel 2 sided printing or N up feature, and then print again. [Cause] Unable to process the PCL print data because of insufficient print page buffer. [Remedy] Increase the size of the print page buffer. [Cause] An invalid command is included in PCL print data. [Remedy] Confirm the print data and try printing again. [Cause] An error occurred during print processing. Probable causes are as follows: 1)Printing was instructed by the Auto Paper selection when [Paper Type Priority] is set to [Auto Paper Off] for all paper in the [Common Service Settings]. 2)ESC/P-K command error occurred. [Remedy] For 1), when printing by the Auto Paper selection, set one of the paper types to other than [Auto Paper Off] in [Paper Type Priority]. For 2), confirm the print data. Refer to "Paper Type Priority" (P.302). 565