Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 437

Installation When Using Microsoft Network (SMB) Installation When Using Microsoft Network (SMB) This section describes how to install the machine using Microsoft Network (SMB). The following shows the reference section for each procedure. Step 1 Preparations...437 Step 2 Configuration on the Machine 437 Step 3 Configuration on the Computer 438 Dell Printer Configuration Web Tool Setting Items 438 Step 1 Preparations The following items are required to set up the machine to use Microsoft Network (SMB). • NetWare server • TCP/IP or NetBEUI network environment • The Driver CD Kit (provided with the machine) Step 2 Configuration on the Machine The following describes the configuration procedures to use Microsoft Networks (SMB) on the machine. Enable the LPD Port, and then configure TCP/IP settings. Note • You can configure the settings using Dell Printer Configuration Web Tool or the Driver CD Kit. For the items that can be configured using Dell Printer Configuration Web Tool, refer to "Dell Printer Configuration Web Tool Setting Items" (P.438). For information on how to configure the setting using the Driver CD Kit, refer to the manual contained in the Driver CD Kit. 1 Display the [Tools] screen. 1) Press the button. 2) Enter the system administrator's user ID with the numeric keypad or the keyboard displayed on the screen, and select [Enter]. When a passcode is required, select [Next] and enter the system administrator's passcode, and select [Enter]. Note • The default user ID is "admin". • The default passcode is "1111". 3) Select [Tools]. 2 Enable the SMB port. 1) Select [Connectivity & Network Setup]. 2) Select [Port Settings]. 3) Select [SMB], and then select [Change Settings]. 4) Select [Port Status], and then select [Change Settings]. 5) Select [Enabled], and then select [Save]. 6) Select [Close] repeatedly until the [Tools] screen is displayed. 437