Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 297

Common Service Settings Allow User to Lock Out Selecting [Lock Out Printer] on the [Home] screen temporarily disables printing. [Release Printer] is displayed during the printer lockout duration. Selecting [Release Printer] enables printing. Note • A job started before the start time will be printed continuously even after elapsing the start time. The job will be printed continuously even if you select [Lock Out Printer] while printing. After the job is completed, the machine enters the printer lockout status. • When both [Set Lockout Duration] and [Allow User to Lock Out] are set and the start time comes while the [Release Printer] button is displayed, the machine automatically enters the printer lockout status. • When you select [Release Printer] during the printer lockout duration, printing is enabled, and when you then select [Lock Out Printer], the machine resumes the printer lockout status. • The printer lockout status is not released automatically even after the end time elapsed. To release the printer lockout status, the control panel operation is required. • The printer lockout duration will not be released even when you switch the power off and then on again, or even when you press the button while the machine is in the Power Saver mode (Low Power mode or Sleep mode). • The machine starts printing in accordance with the setting in [Auto Print] when [Release Printer] is selected. Thus the printing may not start just after [Release Printer] is selected. • You can also print during the printer lockout duration by selecting a job in [Active Jobs] on the [Job Status] screen and then selecting [Promote Job]. • When the [Allow User to Lock Out] check box is deselected, [Disable Auto Printing] in [Home Additional Features] is displayed as [(Not Assigned)]. Power Saver Timers The Power Saver mode has two modes: the Low Power and Sleep modes. When a specified period of time has elapsed, the machine switches to these modes in the following order to reduce power consumption. Last operation on the machine J Low Power mode J Sleep mode Note • You cannot configure the machine not to switch to the Low Power mode or the Sleep mode. From Last Operation to Low Power Mode Specify a time period between 1 and 120 minutes in 1 minute increments to enter the Low Power mode after the last operation. From Last Operation to Sleep Mode Specify a time period between 1 to 120 minutes in 1 minute increments to enter the Sleep mode after the last operation. Note • Configure the [From Last Operation to Sleep Mode] time to be longer than the [From Last Operation to Low Power Mode] time. Time Zone Set the time difference from GMT between -12 and +12 hours. Note • GMT stands for Greenwich Mean Time. Daylight Savings You can set daylight saving time. During daylight saving time period, the machine moves the clock forward by one hour. Select from [Adjust Off], [Adjust by Day, Month & Time], or [Adjust by Month, Week, Day of Week & Time]. If you select [Adjust by Day, Month & Time], specify the month, day, and time for [Start Date] and [End Date]. If you select [Adjust by Month, Week, Day of Week & Time], specify the month, week, day of week, and time for [Start Date] and [End Date]. 297