Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 439
Installation When Using Internet Printing Protocol (IPP), Step 1 Preparations, Step 2 Configuration
View all Dell C5765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 439 highlights
Installation When Using Internet Printing Protocol (IPP) Installation When Using Internet Printing Protocol (IPP) This section describes how to install the machine using Internet Printing Protocol (IPP). The following shows the reference section for each procedure. Step 1 Preparations...439 Step 2 Configuration on the Machine 439 Step 3 Configuration on the Computer 440 Dell Printer Configuration Web Tool Setting Items 440 Note • If the size of print data sent via IPP is larger than the value set in the proxy server, the machine cannot receive the data. In this case, set a larger value in the proxy server or change your browser setting not to use the proxy server. Step 1 Preparations The following items are required to set up the machine to use Internet Printing Protocol (IPP). • TCP/IP network environment • The Driver CD Kit (provided with the machine) Step 2 Configuration on the Machine The following describes the configuration procedures to use Internet Printing Protocol (IPP) on the machine. Enable the IPP port, and then configure TCP/IP settings. Note • You can configure the settings using Dell Printer Configuration Web Tool. For the items that can be configured using Dell Printer Configuration Web Tool, refer to "Dell Printer Configuration Web Tool Setting Items" (P.440). 1 Display the [Tools] screen. 1) Press the button. 2) Enter the system administrator's user ID with the numeric keypad or the keyboard displayed on the screen, and select [Enter]. When a passcode is required, select [Next] and enter the system administrator's passcode, and select [Enter]. Note • The default user ID is "admin". • The default passcode is "1111". 3) Select [Tools] on the [Home] screen. 2 Enable the IPP port. 1) Select [Connectivity & Network Setup]. 2) Select [Port Settings]. 3) Select [IPP], and then select [Change Settings]. 4) Select [Port Status], and then select [Change Settings]. 5) Select [Enabled], and then select [Save]. 6) Select [Close] repeatedly until the [Tools] screen is displayed. 439