Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 54

3 Copy Step 4 Starting the Copy Job The following describes how to start a copy job. 1 Press the button. Note • If the document has been loaded in the document feeder, do not hold down the document while it is being conveyed. • Move the lever of the fusing unit down to set to the Envelope mode before copying on an envelope. Return the lever to its original position before copying on other types of papers. Any type of paper other than envelope cannot be copied while the lever is set to the Envelope mode position. For information on button how to switch the lever of the fusing unit, refer to "Loading an Envelope in Trays 1 to 4" (P.209) or "Loading an Envelope in Tray 5 (Bypass Tray)" (P.212). • If a problem occurs, an error message appears on the touch screen. Solve the problem according to the message. • You can set the next job during copying. If you have more documents If you have more documents to copy, select [Next Original] on the touch screen while the current document is being scanned. This allows you to scan the documents as a single set of data. 2 Select [Next Original] while scanning is in progress. Note • When using the document feeder, load the next document after the machine has finished scanning the first document. • When [Next Original] is displayed on the screen shown on the right and no operation is performed for a certain period of time, the machine automatically assumes that there are no more documents. • You can change the number of copies by selecting [Change Quantity] that is displayed after selecting [Delete]. 3 Load the next document. 4 Press the button. If you have more documents, repeat steps 3 and 4. 54