Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 395

Setup Delay Start Set whether or not to use a delayed start transmission. If the machine's system clock is set to the 24-hour display, [AM] and [PM] do not appear. For information on the system clock, refer to "Time" (P.295). Remote Folder Select whether or not to send a fax to a recipient's folder. To use folder communications, you must obtain the recipient's folder number and passcode in advance. 1 Select [On]. 2 Enter a recipient's folder number with the numeric keypad. 3 If a passcode is set, enter the passcode with the numeric keypad. Note • If no passcode is set, leave the text boxes blank and select [Save]. F Code Select whether or not to use F code communications. F Code is the transmission procedure set by the Communications and Information Network Association of Japan and is the T.30 (communication protocol) method for using subaddresses that are standardized by the ITU-T. For F code (sub address) and password, you can use up to 20 digits 0 to 9, *, and #. 1 Select [On]. 2 Enter the F code with the numeric keypad. Note • The F code consists of "0" + folder number. For example, if the folder number is 123, the F code will be "0123". 3 Enter the password as required with the numeric keypad, and then select [Save]. Note • You can enter up to 20 digits for the password. Relay Broadcast Set the instruction given to a relay station, which is used when the machine is a base station and the registered speed dial is a relay station for relay broadcast. When selecting [On], set [Relay Station ID], [Print at Relay Station], and [Broadcast Recipients]. 1 Select [On]. 2 Enter a 2-digit relay station ID with the numeric keypad. Note • The relay station ID is the address number for the base station (the machine) already registered on the relay station. 3 Select [Speed Dial 001099]. 395