Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 435
Step 3 Configuration on the Computer, Using an LPD Port in NDPS
View all Dell C5765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 435 highlights
Installation When Using NetWare 5 Print a configuration report to confirm that the NetWare port is enabled, and confirm the NetWare device name and the network address. For information on how to print a configuration report, refer to "Print Reports" (P.260). Using an LPD Port in NDPS 1 Display the [Tools] screen. 1) Press the button. 2) Enter the system administrator's user ID with the numeric keypad or the keyboard displayed on the screen, and select [Enter]. Note • The default user ID is "admin". • The default passcode is "1111". 3) Select [Tools] on the [Home] screen. 2 Enable the LPD port. 1) Select [Connectivity & Network Setup]. 2) Select [Port Settings]. 3) Select [LPD], and then select [Change Settings]. 4) Select [Port Status], and then select [Change Settings]. 5) Select [Enabled], and then select [Save]. 6) Select [Close] repeatedly until the [Tools] screen is displayed. 3 Set an IP address and the other addresses. Skip this step if an IP address is already set. If DHCP or BOOTP is available in your environment, configure the method for obtaining the address. The configuration of an IP address, a subnet mask, and a gateway address is not required. For information on how to set an IP address, refer to "Protocol Settings" (P.328). 4 Select [Close] repeatedly until the [Tools] screen is displayed. 5 Select [Close]. Note • Rebooting the machine may be required depending on the settings. When a message displayed on the screen, follow the message and reboot the machine. 6 Print a configuration report to confirm that the LPD port is enabled and that TCP/IP is set up correctly. For information on how to print a configuration report, refer to "Print Reports" (P.260). Configure other LPD settings as necessary. For information on the LPD settings, refer to "Installation When Using TCP/IP (LPD/Port 9100)" (P.431). Step 3 Configuration on the Computer To print from the machine, you need to install a print driver on your computer. For information on the supported operating systems, refer to "Supported Operating Systems" (P.428). For information on the driver installation procedures, refer to the manual contained in the Driver CD Kit. 435