Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 603
Remedy] Retry sending., manual printing completes.
View all Dell C5765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 603 highlights
Status Code Status Code 033-716 033-717 033-718 033-719 033-721 033-725 033-726 033-728 033-731 033-733 033-734 033-735 033-736 033-737 033-738 Cause and Remedy [Cause] The folder specified from the sender's machine does not exist. [Remedy] Register the folder. Refer to "Create Folder" (P.381). [Cause] The folder passcode specified from the sender's machine is incorrect. Or, the machine passcode for reception is incorrect. [Remedy] Inform the correct information to the sender's machine. [Cause] Fax or polling documents do not exist in the folder specified from the sender's machine. [Remedy] Store fax or polling documents into the folder as necessary. [Cause] The document may be deleted by turning the machine off and then on. [Remedy] Retry sending. [Cause] An error occurred during fax transmission. [Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch on the machine power. If the error still is not resolved, contact Customer Support at dell.com/contactdell. [Cause] The hard disk is full. [Remedy] Delete unnecessary data from the hard disk to free up disk space. [Cause] The received document was printed with 1 sided printing, because 2 sided printing is not available for mixed sized documents. [Remedy] No measure is required. [Cause] The auto print formatting of the received fax document was interrupted by a manual print operation. [Remedy] No measure is required. The machine will automatically start the auto print job after manual printing completes. [Cause] The printing of the received fax document was interrupted. [Remedy] The auto print processing of the received fax document was interrupted by a manual print operation. No measure is required. [Cause] An error occurred during fax transmission. [Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch on the machine power. If the error still is not resolved, contact Customer Support at dell.com/contactdell. [Cause] Because a report job was instructed while preparing to print a received fax, the printing of the received fax is temporarily suspended. [Remedy] No measure is required. [Cause] An error occurred during fax transmission. [Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch on the machine power. If the error still is not resolved, contact Customer Support at dell.com/contactdell. [Cause] The forwarding job was interrupted because the data volume exceeded the upper limit. [Remedy] No measure is required. [Cause] An error occurred during fax transmission. [Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support at dell.com/contactdell. [Cause] Received abnormal JBIG data. [Remedy] No measure is required. 603