Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 334
Remote Authentication/Directory Service, SMTP Server Settings
View all Dell C5765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 334 highlights
15 Tools Login Name Enter the name to login to the POP3 server with up to 64 characters. Password Enter a password for the POP3 server with up to 64 characters. Enter the same password in [New Password] and [Retype Password] using the numeric keypad displayed by selecting [Keyboard]. If you do not set the password, leave the text boxes blank and select [Save]. POP Password Encryption Select [On (APOP)] to encrypt the password. SMTP Server Settings Set the SMTP server. In [SMTP Server Settings], you can set the following items: Note • For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255. • For IPv6, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a hexadecimal value. • When you make an entry mistake, press the (Clear) button and enter again. SMTP Server Name/IP Address Enter a server name or IP address, and then select [Save]. Up to 128 characters are allowed. SMTP Server Port Number Enter a port number in the range from 1 to 65535. The default value is 25. Note • Do not use the numbers assigned to the other ports. E-mail Send Authentication Select one from [Off], [POP before SMTP], or [SMTP AUTH]. Note • If [POP before SMTP] is selected, the POP3 settings must be set. • AUTH PLAIN, AUTH-LOGIN, or AUTH CRAM-MD5 can be used as an authentication method. Login Credentials for E-mail Send Select the login user name when sending e-mails from [Remotely Authenticated User] or [System]. When [Remotely Authenticated User] is selected and if the machine tries authenticating the remote server before a job startup, the machine performs verification at the time of transmission with the remotely authenticated user name and password. You can also select the post-failure behavior of the machine from [Cancel E-mail Send] and [Relogin using System Data]. If you do not set remote authentication, the machine uses the user ID and passcode of the machine for authentication. SMTP AUTH Login Name Enter the user name for verification purposes at the SMTP server with up to 64 characters. SMTP AUTH Password Enter the password for verification purposes at the SMTP server. Up to 64 single-byte characters are allowed. Note • If you do not set the password, leave the text boxes blank and select [Save]. Remote Authentication/Directory Service You can make the settings for the remote authentication server and directory service. 334