Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 501
When [Login to Remote Accounts] is Selected, Add This User To Authorization Group] respectively
View all Dell C5765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 501 highlights
Configuration for Authentication 9 Select [Service Access]. 10 Select [Unlocked] for the required services to permit users unlimited access, and then select [Save]. 11 After you finish settings for each feature, select [Close]. 12 To disable button operations on the control panel, select [Device Access] and select [Locked], and then select [Save] and then [Close]. 13 Select [Passcode Entry from Control Panel] under [Passcode Policy]. Select [On] to prompt users to enter their passcode, or select [Off] if the passcode entry is not required, and then select [Save] and then [Close]. 14 Select [Create/View User Accounts]. 15 Select a user displayed as [], and then select [Create/Delete]. 16 Enter a User ID and select [Save]. 17 Select [Account Limit]. 18 Configure the [Account Limit] and [Feature Access] settings for each service, and then select [Close]. 19 If necessary, select a user role and an authorization group for the user under [User Role] and [Add This User To Authorization Group] respectively, and then select [Save]. 20 Select [Close] repeatedly until the [Tools] screen is displayed. 21 Select [Close]. Note • Rebooting the machine may be required depending on the settings. When a message displayed on the screen, follow the message and reboot the machine. • The machine enters the Login mode, and [Login] is displayed at the lower left of the [Home] screen. • When [Locked (Show Icon)] is selected for a service under [Service Access], [ ] is displayed on the button of the applicable service on the [Home] screen. Also, [ : Requires Login] is displayed at the lower left of the [Home] screen. [ ] and [ : Requires Login] are not displayed after authentication. • When [Locked (Hide Icon)] is selected for a service under [Service Access] the applicable service is not displayed on the [Home] screen. The services is displayed after authentication. When [Login to Remote Accounts] is Selected Perform the following procedures to use remote authentication. 1 Press the button. 2 Enter the system administrator's user ID with the numeric keypad or the keyboard displayed on the screen, and select [Enter]. When a passcode is required, select [Next] and enter the system administrator's passcode, and select [Enter]. Note • The default user ID is "admin". • The default passcode is "1111". 3 Select [Tools] on the [Home] screen. 4 Select [Authentication/Security Settings]. 5 Select [Authentication]. 6 Select [Login Type]. 7 Select [Login to Remote Accounts], and then select [Save]. For more information, refer to "Login Type" (P.408). 501