Dell C5765DN Dell Color Laser Multifunction Printer User's Guide - Page 396
Create Fax Group Recipients, Billing - Day Time, Billing - Midnight
View all Dell C5765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 396 highlights
15 Tools 4 Enter a speed dial number of broadcast destination (001 to 099) or group number (#01 to #09) registered on the relay station with the numeric keypad, and then select [Add]. Note • If there are more than one broadcast destinations, repeat step 4. 5 To print a document also at the relay station, under select [On] for [Print at Relay Station]. 6 Select [Save]. Billing - Day Time, Billing - Night Time, Billing - Midnight Set the connection time for one unit charge in each of the time bands (daytime/night/ midnight). You can set a value from 0.1 to 255.9 seconds in 0.1 second increments. This item is displayed when [Accounting] > [Accounting Type] is set to [Local Accounting] and [Fax] is set to [Enable Accounting] under [Auditron Mode]. For information on how to enable the feature, refer to "Auditron Mode" (P.403). The information registered can be confirmed by printing a Billing Data List. For information about how to print, refer to "Billing Data List" (P.265). 1 Select one of [Billing - Day Time], [Billing - Night Time], and [Billing - Midnight]. 2 Select [Billing]. 3 Enter the time for one unit charge from 0.1 to 255.9 seconds in 0.1 second increments with the numeric keypad. 4 Select [Save]. When the [Delete Entry] Button is Selected Selecting this button deletes all the information registered for the address selected. To delete all information registered, select [Delete]. Note • Deleted information cannot be restored. Create Fax Group Recipients You can register addresses for broadcast transmission as a group. Each group can include up to 20 address numbers. The maximum number of groups that can be registered is 50. Note that recipients to be added to a group must be registered in the speed dials on the Address Book. Note • Even when the speed dial number of fax recipients (address book entries) are included in a group, the machine does not send faxes to the recipients if their address types are set to [Email] or [Server]. • You cannot include a group in another group. • You can use wildcards for specifying the numbers in the last one or two digits as shown in the following example: - 001*:Specifies the 10 addresses with address numbers 0010 to 0019. - ****:Specifies all address numbers. 396