HP Photosmart C6200 User Manual - Page 157
Card access error, Use only one card at a time, Card is inserted incorrectly
View all HP Photosmart C6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Chapter 14 Solution: Make sure you fully insert the memory card into the appropriate slot on the HP All-in-One, and then try the task again. Card access error Cause: There are two or more memory cards inserted into the HP All-in-One at the same time. Solution: Remove all but one memory card. The HP All-in-One reads the remaining memory card and displays the first photo stored on the memory card. Cause: You have inserted a Compact Flash memory card backwards or upside down. Solution: Remove the memory card and reinsert it correctly. The front label of the Compact Flash card faces left. Cause: You have not fully inserted the memory card. Solution: Remove the memory card and reinsert it in the memory card slot until it stops. Use only one card at a time Cause: Multiple memory cards are inserted in the HP All-in-One. Solution: You can insert only one memory card at a time. If more than one memory card is inserted, the Attention light will blink rapidly, and an error message will appear on the display. Remove the additional memory card to resolve the problem. Troubleshooting Card is inserted incorrectly Cause: The card is inserted backwards or upside down. Solution: Turn the memory card so that the front label faces left and the contacts are on the right, and then push the card forward into the appropriate slot until the Photo light turns on. If the memory card is not inserted properly, the HP All-in-One will not respond and the Photo light (near the memory card slots) will not turn on. After the memory card has been inserted properly, the Photo light will blink for a few seconds, and then remain lit. Card is not fully inserted Cause: The card is not fully inserted. Solution: Make sure you fully insert the memory card into the appropriate slot on the HP All-in-One. 156 Troubleshooting