HP Xw5000 hp workstation xw5000 Technical Reference (309233-001 10/02) - Page 39
Installing a Graphics or Accessory Card, Full-length Card Guide, Removing a Card
UPC - 613326803318
View all HP Xw5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
7. For full-length cards, disengage the front of the card from the card guide by removing the screw and releasing the card guide locking clip. Figure 2-12 Full-length Card Guide 8. Grasp the bulkhead end of the card and its opposite edge and lift the card out of the slot. Store the card in a static bag. Figure 2-13 Removing a Card 9. If you are not going to install a new card in that slot, insert a bulkhead blank and snap the PCI retainer into place. Installing a Graphics or Accessory Card To install a new card: 1. Remove the existing card (page 37) or bulkhead blank in the slot you want to use. 2. Grasp the bulkhead end of the card and its opposite edge and insert the card into its connector. 3. Align the new card carefully and slide it into position. Press it into the slot.