HP Z210 HP Z210 CMT Workstation Maintenance and Service Guide - Page 102
Expansion card, Expansion card slot description, Removing an expansion card
View all HP Z210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Expansion card PCIe I/O slots may supply less bus bandwidth than what is physically defined for the slot. Expansion card slot description NOTE: The x1, x4, and x16 designators describe the mechanical length of the slot. The number in parentheses lists the number of electrical PCIe lanes routed to the expansion slot. For example, x16(4) means that the expansion slot is mechanically a x16 length connector, with four PCIe lanes connected. Use the following table to determine PCIe card compatibility. Table 5-6 HP x210 CMT Workstation PCIe compatibility matrix Slot Mechanical compatibility Electrical lanes available 1 x8 connector 4 2 x16 connector 16 3 x1 connector 1 4 x16 connector 4 5 x1 connector 1 Removing an expansion card To remove an expansion card: 1. Disconnect power from the workstation (see Predisassembly procedures on page 62). 2. Remove the side access panel (see Removing the side access panel on page 65). 90 Chapter 5 Replacing components ENWW