HP Z210 HP Z210 CMT Workstation Maintenance and Service Guide - Page 154

Table 6-9, Screen message, Probable cause, Recommended action

Get HP Z210 PDF manuals and user guides View all HP Z210 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 154 highlights

Table 6-9 POST error messages (continued) Screen message Probable cause Recommended action 213-Incompatible Memory Modules A memory module in the memory socket identified in the error message is missing critical SPD information, or is incompatible with the chipset. 1. Verify the memory module type. 2. Insert the DIMM in another memory socket. 3. Replace the module with a DIMM conforming to the SPD standard. 214-DIMM Configuration Warning DIMMs are not installed correctly (not paired correctly). See the service label on the computer access panel for the correct memory configurations, and reseat the DIMMs accordingly. 215-DIMM Configuration Error 216-Memory Size Exceeds Maximum Supported The amount of memory installed exceeds that supported by the hardware. 1. Verify how much memory the computer supports. 2. Remove the excess memory. 301-Keyboard Error Keyboard failure. 1. Reconnect the keyboard with the computer powered off. 2. Check the connector for bent or missing pins. 3. Be sure that none of the keys are pressed. 4. Replace the keyboard. 303-Keyboard Controller Error I/O board keyboard controller is defective or is not set properly. 1. Reconnect the keyboard with the computer powered off. 2. Connect a keyboard directly to the computer (instead of through a switch box). 3. Replace the system board. 304-Keyboard or System Unit Error Keyboard failure. 1. Reconnect the keyboard with the computer powered off. 2. Connect a keyboard directly to the computer (instead of through a switch box). 3. Be sure that none of the keys are pressed. 4. Replace keyboard. 5. Replace system board. 510-Splash Screen image corrupted Splash Screen image has errors. Update system BIOS. 511-CPU Fan not detected Fan is not connected or is defective. 1. Reseat the fan cable. 2. Reseat the fan. 3. Replace the fan. 512-Rear Chassis fan not detected Rear fan missing, disconnected, or defective. 1. Reseat the fan cable. 2. Reseat the fan. 3. Replace the fan. 142 Chapter 6 Diagnostics and troubleshooting ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
Table 6-9
POST error messages
(continued)
Screen message
Probable cause
Recommended action
213—Incompatible Memory
Modules
A memory module in the memory
socket identified in the error message
is missing critical SPD information, or
is incompatible with the chipset.
1.
Verify the memory module type.
2.
Insert the DIMM in another memory socket.
3.
Replace the module with a DIMM conforming
to the SPD standard.
214—DIMM Configuration
Warning
DIMMs are not installed correctly (not
paired correctly).
See the service label on the computer access panel for
the correct memory configurations, and reseat the
DIMMs accordingly.
215—DIMM Configuration
Error
216—Memory Size Exceeds
Maximum Supported
The amount of memory installed
exceeds that supported by the
hardware.
1.
Verify how much memory the computer supports.
2.
Remove the excess memory.
301—Keyboard Error
Keyboard failure.
1.
Reconnect the keyboard with the computer
powered off.
2.
Check the connector for bent or missing pins.
3.
Be sure that none of the keys are pressed.
4.
Replace the keyboard.
303—Keyboard Controller
Error
I/O board keyboard controller is
defective or is not set properly.
1.
Reconnect the keyboard with the computer
powered
off.
2.
Connect a keyboard directly to the computer
(instead of through a switch box).
3.
Replace the system board.
304—Keyboard or System
Unit Error
Keyboard failure.
1.
Reconnect the keyboard with the computer
powered off.
2.
Connect a keyboard directly to the computer
(instead of through a switch box).
3.
Be sure that none of the keys are pressed.
4.
Replace keyboard.
5.
Replace system board.
510—Splash Screen image
corrupted
Splash Screen image has errors.
Update system BIOS.
511—CPU Fan not detected
Fan is not connected or is defective.
1.
Reseat the fan cable.
2.
Reseat the fan.
3.
Replace the fan.
512—Rear Chassis fan not
detected
Rear fan missing, disconnected, or
defective.
1.
Reseat the fan cable.
2.
Reseat the fan.
3.
Replace the fan.
142
Chapter 6
Diagnostics and troubleshooting
ENWW