Karcher HGE 36-60 Battery Operating instructions 2 - Page 14
Warning, Caution, Attention
View all Karcher HGE 36-60 Battery manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
● Severe injuries when objects are flung by the cutting blade or when the cutting tool becomes entangled in wires or cords. Inspect the work area thoroughly for objects such as stones, sticks, metal, wires, bones or toys and remove these before using the device. ṇ WARNING ● Children and minors must not use the device. ● The device is not intended for use by persons with re- stricted physical, sensory or mental abilities or those lacking in experience and / or lacking in knowledge. ● Keep children and other persons out of the work area while you are using the device. ● You need an unobstructed view of the work area in order to be able to recognise any potential dangers. Use the device only under good lighting conditions. ● Do not operate the device in the vicinity of posts, fences, buildings or other immovable objects. ● Switch the motor off, remove the battery pack and make sure that all moving parts have stopped moving: ● Before adjusting the working position of the cutting mechanism. ● Before cleaning the device or removing a blockage. ● When leaving the device unattended. ● Before changing accessories. ● Risk of incision injuries and crushing injuries. Avoid contact with the cutting tools. Do not place your hands or fingers between the cutting tools or in a position where they can be cut or crushed. ● Danger of injury. Do not make any modifications to the device. ● Ensure that all protective devices, deflectors and handles are correctly fitted and securely fastened. ṇ CAUTION ● Wear especially safety glasses and hearing protection. ● Hearing protection can impair your ability to hear warning sounds, so pay attention to hazards in your vicinity and in the work area. ● Wear head protection when working in areas with a danger of falling objects. ● Risk of injury from sharp cutting tools. Wear non-slip, sturdy protective gloves when handling the cutting tool. ● Risk of injury when loose fitting clothing, hair or jewellery is caught by moving parts of the device. Keep clothing and jewellery away from moving parts of the device. Tie long hair back. ● You must not operate the device when you are under the influence of medication or drugs which restrict your reactive capacity. Only work with the device when you are well rested and are in good health. ● Do not use the device if it vibrates unusually or makes unusual noises. ● Check the device for damage before use and make sure that the screws on the blade are firmly tightened. ● Do not use the device if it has been dropped beforehand, has received an impact or is visibly damaged. Have any damage repaired correctly before using the device again. ● Do not use the device on ladders or unstable surfaces. ● Check that the cutting tool cannot come into contact with anything before starting the device. ● Risk of injury from exposed blades. Fit the blade guard when not using the device, also during short work breaks. ATTENTION ● Do not force the device through dense bushes. This can block and slow down the cutting tool. Reduce the working speed if the cutting tool blocks. ● Do not attempt to cut boughs and branches that are obviously too large to fit between the cutting blades. Use a non-motorised hand saw or branch saw for cutting larger boughs and branches. Safe servicing and care ṇ WARNING ● Switch the motor off, remove the battery pack and make sure that all moving parts have stopped moving: ● Before cleaning or servicing the device. ● Before changing accessories. ● Risk of injury from sharp cutting tools. Exercise special care when removing and fitting the blade guard, cleaning and oiling the device. ● Ensure that the device is in a safe condition by regularly checking that all bolts, nuts and screws are screwed tight. ● Each time after using the device, remove dirt from the cutting tools using a hard brush and apply a suitable oil for rust protection before fitting the blade guard. The manufacturer recommends using a spray for rust protection and oiling. Ask your Customer Service department to recommend a suitable spray. You can oil the cutting tools as described, each time before using the device. ṇ CAUTION ● Only use accessories and spare parts which are approved by the manufacturer. Only original accessories and original spare parts ensure that the appliance will run fault-free and safely. ATTENTION ● Clean the product with a soft, dry cloth each time after use. Note ● Service and maintenance work may only be performed by suitably qualified and specially trained personnel. We recommend sending the product to an authorised service centre for repair. ● You may only perform the adjustments and repairs described in these operating instructions. Contact your authorised Customer Service department for other repairs. Safe transport and storage ṇ WARNING ● Switch the device off, allow it to cool down and remove the battery pack before storage or transportation. ṇ CAUTION ● In order to prevent accidents or injuries, you must only transport and store the device with the blade guard installed and with the rechargeable battery removed. ● Risk of injury and damage to the device. Secure the device against movement or falling down during transport. ATTENTION ● Remove all foreign bodies from the device before storage or transportation. ● Store the device in a dry, well ventilated location out of the reach of children. Keep the device away from corrosive substances such as garden chemicals. ● Do not store the device outdoors. Residual risks ṇ WARNING ● Certain residual risks remain present, even when the device is operated in the prescribed manner. The following dangers can be present when using the device: 14 English