Pioneer AVIC-5000NEX Owner's Manual - Page 159

System settings Chapter 31 System settings p If an error message appears on the screen, touch [Continue] to proceed and start the recovery sequence. Checking sensor learning status and driving status p This product can automatically use its sensor memory based on the outer dimensions of the tires. 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears. 3 Touch [System Information]. The following screen appears. Indicates driving distance. 3 Acceleration or deceleration/Rotational speed Indicates the acceleration or deceleration velocity of your vehicle. The rotational speed when your vehicle turns to the left or right is also shown. 4 Inclination Indicates the incline of the street that you are currently on. 5 Speed Pulse Indicates the total number of speed pulses. 6 Degree of learning Sensor learning situations for distance (Distance), right turns (Right Turn), left turns (Left Turn) and 3D detection (3D) are indicated by the length of the bars. p When the tires have been changed or chains have been fitted, turning on the Speed Pulse allows the system to detect the fact that the tire diameter has changed, and automatically replaces the value for calculating distance. p If a separately sold speed pulse generator (ND-PG1) is connected, the distance calculation value cannot be replaced automatically. 4 Touch [3D Calibration Status]. The "3D Calibration Status" screen appears. 1 2 5 3 6 4 1 Learning Indicates the current driving mode. 2 Distance Clearing the status You can delete the learned results stored in "Distance", "Speed Pulse" or "Learning". 1 Touch [Distance] or [Speed Pulse]. A message confirming whether to erase the data appears. 2 Touch [Yes]. The results stored in "Distance" or "Speed Pulse" are cleared. 3 Touch [Learning]. The pop-up menu appears. 4 Touch [Reset All]. All learned results are cleared. p Touch [Reset All] for the following cases: En 159