Pioneer AVIC-5000NEX Owner's Manual - Page 161
NOKInstallation Angle, NOKVibration, Speed Pulse, Illumination, Back Signal, iDataLink, Unsupported
View all Pioneer AVIC-5000NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
System settings The installation position of this product is shown. If installed correctly, "OK" appears. Indicates whether the installation position of this product is correct or not. When this product is installed at an extreme angle exceeding the limitation of the installing angle, "NOK(Installation Angle)" will be displayed. When the angle of this product has been changed, "NOK(Vibration)" will be displayed. 4 Speed Pulse The Speed Pulse value detected by this product is shown. "0" is shown while the vehicle is stationary. 5 Illumination When the headlights or small lamps of the vehicle are on, "ON" is displayed. When the small lamps of the vehicle are off, "OFF" is displayed. (If the orange/white lead is not connected, "OFF" appears.) 6 Back Signal When the shift lever is shifted to "R", the signal switches to "High" or "Low". (One of these is displayed depending on the vehicle.) 7 iDataLink When the optional iDatalink adapter is connected and the protocol version matches, "OK" is displayed. If the version does not match, "Unsupported version" is displayed. If the optional iDatalink adapter is not connected, "NOK" is displayed. System settings Chapter 31 En 161