Ricoh SP C252SF Operating Instructions - Page 204
Fax Features Settings
View all Ricoh SP C252SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
7. Configuring the Machine Using the Control Panel Fax Features Settings Reception Settings Specifies the settings for receiving a fax. • Switch Reception Mode Specifies the reception mode. Default: [Fax Only] • Fax Only The machine automatically answers all incoming calls in fax reception mode. • FAX/TEL(Mnl.) The machine rings when it receives incoming calls. The machine receives faxes only when you manually receive faxes. • FAX/TAD The machine receives faxes automatically when a fax call is received. Otherwise, the connected telephone answering device answers the call. • FAX/TEL(Auto) The machine receives faxes automatically when a fax call is received. Otherwise, the machine starts to ring. • Auto Reduction Sets the machine to reduce the size of a received fax if it is too large to print on a single sheet of paper. Note that the machine only reduces the size down to 74%. If further reduction is required to fit the fax on a single sheet, it will be printed on separate sheets without being reduced. Default: [On] (Default may be [Off] depending on the [Country] setting under [Admin. Tools].) • Off • On • Number of Rings Specifies the number of times the machine rings before it starts to receive faxes in Fax Only mode. Default: 3 times • 3 to 5 times, in increments of 1 • RX Mode Auto Switch Time Specifies the length of time the machine tries to detect the fax calling tone in FAX/TEL Automatic mode. 202