Ricoh SP C252SF Operating Instructions - Page 84
Placing Originals, About Originals, Recommended size of originals, Types of originals not supported
View all Ricoh SP C252SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
2. Loading Paper Placing Originals This section describes the types of originals you can use and how to place them. About Originals This section describes the types of originals that can be placed and the parts of the original that are chipped in the scanned copy. Recommended size of originals This section describes the recommended size of the original. Exposure glass Up to 216 mm (8.5 inches) in width, up to 297 mm (11.7 inches) in length ADF • Paper size: 140 to 216 mm (51/2 to 81/2 inches) in width, 140 to 356 mm (51/2 to 14 inches) in length • Paper weight: 52 to 105 g/m2 (13.8 to 28.0 lb.) • Only 1 sheet of original can be placed on the exposure glass at a time. • In the ADF, up to 35 sheets of originals can be placed at once (when using paper weighing 80 g/m2, 20 lb.). Types of originals not supported by the Auto Document Feeder If placed in the ADF, the following types of original might be damaged or become jammed, or result in gray or black lines appearing on prints: • Originals larger or heavier than recommended • Stapled or clipped originals • Perforated or torn originals • Curled, folded, or creased originals • Pasted originals • Originals with any kind of coating, such as thermal fax paper, art paper, aluminum foil, carbon paper, or conductive paper • Originals with perforated lines • Originals with indexes, tags, or other projecting parts 82