Ricoh SP C252SF Operating Instructions - Page 318
When You Cannot Print Clearly, Select [Lvl.1: Weak], [Lvl.2: Medium] or [Lvl.3: Strong]
View all Ricoh SP C252SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 318 highlights
10. Troubleshooting When You Cannot Print Clearly Problem Solution The whole printout is blurred. • The paper being used may be damp. Use paper that has been stored properly. See page 57 "Supported Paper". • Select [Lvl.1: Weak], [Lvl.2: Medium] or [Lvl.3: Strong] in [Anti-Humidity Level] under [System Settings]. Note that if you select [Lvl.2: Medium] or [Lvl.3: Strong], the first print takes longer than subsequent prints. • If you enable [Toner Saving] under [System Settings], printing is generally less dense. • If you select [On] for [Economy Color] in the [Print Quality] tab (PCL printer driver) or under [Printer Features] (PostScript 3 printer driver), print will be at lower density. For details, see the printer driver Help. • The print cartridge is almost empty. If "Replace Toner: X" ("X" indicates the toner color) appears on the screen, replace the indicated print cartridge. • Condensation may have occurred. If rapid change in temperature or humidity occurs, use this machine only after it has acclimatized. The toner is powdery and comes away from the paper, or the printed image has a matt appearance. Check if the fusing unit levers are properly set. Pull up the fusing unit levers. Toner smears appear on the print side of the page. • The paper setting may not be correct. For example, although you are using thick paper, the setting for thick paper may not be specified. Check the printer driver's paper settings. See the printer driver Help. • Check that the paper is not curled or bent. Envelopes can be curled easily. Flatten out the paper before loading it. See page 71 "Loading Paper". 316