Ricoh SP C252SF Operating Instructions - Page 328
Printing, Glass and ADF.
View all Ricoh SP C252SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 328 highlights
10. Troubleshooting Printing Problem Causes Solutions Print is slanted. The paper is fed at a slant. Load the paper correctly. For details about loading paper, see page 71 "Loading Paper". Misfeeds occur frequently. The number sheets loaded Load paper only as high as the upper in the paper tray exceeds limit markings inside the paper tray. the capacity of the machine. The paper tray's side guide Pinch the paper guide lightly, and then is set too tightly. adjust its position. The paper is too thick or too thin. Use the recommended paper. For details about the recommended paper, see page 57 "Supported Paper". Printed paper is being used. Do not load sheets that have already been copied or printed. Sheets are sticking together. Fan the sheets thoroughly before loading them. Alternatively, feed the sheets into the machine one at a time. Printed copies are together, resulting in jams. Sheets are sticking together. Fan the sheets thoroughly before loading them. Alternatively, feed the sheets into the machine one at a time. Copy paper becomes creased. Printed paper is being used. Do not load sheets that have already been copied or printed. The paper is too thin. Use the recommended paper. For details about the recommended paper, see page 57 "Supported Paper". Edges of sheets are creased. You are using a nonrecommended paper. Use the recommended paper. For details about the recommended paper, see page 57 "Supported Paper". Black lines appear on the file printed at the destination. The exposure glass, exposure glass, exposure glass cover, or guide plate of the ADF is dirty. Clean the components. For details about how to clean the machine, see page 294 "Cleaning the Exposure Glass and ADF". 326