Ricoh SP C252SF Operating Instructions - Page 338
Select the A4, Letter, or Legal size, select [Off] or [Manual 2 Sided Scan
View all Ricoh SP C252SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 338 highlights
10. Troubleshooting Message Cannot Copy This Setting Comb.: 2 on 1 / 4 on 1 Ppr.Size: B6 / 7 1/4x10 1/2 Cannot copy. Set original to ADF. Check Paper Size Check Paper Type Connection Failed Cover open Density Sensor Require Cleaning Causes Solutions 2-in-1 or 4-in-1 copy could not be performed because the tray does not contain the valid size paper, which are A4, Letter, or Legal size. • Using the machine's control panel, specify [Select Paper] to print copies using the A4, Letter, or Legal size paper. See page 193 "Copier Features Settings". • Select the A4, Letter, or Legal size paper for the tray selected for printing copies. See page 215 "Tray Paper Settings". 2-in-1, 4-in-1, or 2-sided copy could not be performed because the originals were not placed in the ADF. • Use the ADF, even when copying a single sheet. • If you need to use the exposure glass, select [Off] or [Manual 2 Sided Scan Mode] in [Duplex/Combine] under copy settings, and then try again. See page 193 "Copier Features Settings". The paper size set for the Press [FormFeed] to begin printing, or document differs from the size of press [JobReset] to cancel the job. the paper in the indicated tray. The paper type set for the document differs from the type of the paper in the indicated tray. Press [FormFeed] to begin printing, or press [JobReset] to cancel the job. The line could not be connected correctly. • Check if the telephone line cord is properly connected to the machine. • Disconnect the telephone line from the machine, and connect the cord to a telephone. Check if you can make calls using the telephone. If you cannot make calls this way, contact your telephone company. A cover is open. Close the cover completely. The machine failed to adjust color registration. Clean the toner density sensor. See page 286 "Cleaning the Toner Density Sensor". 336