Ricoh SP C252SF Operating Instructions - Page 227
Connects with one touch using WPS Wi-Fi Protected Setup. For details, see Wi-Fi Settings, IP Address
View all Ricoh SP C252SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Network Settings Displays the current connection status. • MAC Address Displays the machine's MAC address. • Current Connection Displays detailed information about the connection, such as the SSID and the wireless signal strength. • Setup Wizard Displays the procedure for manually connecting to a wireless LAN. It leads you step-by-step through configuring the settings for connecting with a wireless LAN. • WPS Connects with one touch using WPS (Wi-Fi Protected Setup). For details, see Wi-Fi Settings Guide. IPv4 Configuration • DHCP Sets the machine to receive its IPv4 address, subnet mask, and default gateway address automatically from a DHCP server. Default: [Active] • Inactive • Active • IP Address Specifies the machine's IPv4 address when DHCP is not used. Use this menu to check the current IP address when DHCP is used. Default: XXX.XXX.XXX.XXX The numbers represented by "X" vary according to your network environment. • Subnet Mask Specifies the machine's subnet mask when DHCP is not used. Use this menu to check the current subnet mask when DHCP is used. Default: XXX.XXX.XXX.XXX The numbers represented by "X" vary according to your network environment. • Gateway Address Specifies the machine's default gateway address when DHCP is not used. Use this menu to check the current default gateway address when DHCP is used. Default: XXX.XXX.XXX.XXX The numbers represented by "X" vary according to your network environment. 225