Ricoh SP C252SF Operating Instructions - Page 208
Default: [Every TX Image Attached], Print TX Status Report
View all Ricoh SP C252SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
7. Configuring the Machine Using the Control Panel • 9.6 Kbps • 7.2 Kbps • 4.8 Kbps • 2.4 Kbps • Reception Speed Specifies the reception speed for the fax modem. Default: [33.6 Kbps] • 33.6 Kbps • 14.4 Kbps • 9.6 Kbps • 7.2 Kbps • 4.8 Kbps • 2.4 Kbps • JBIG Enables transmission and reception of JBIG-compressed images. Note that to use this function, [ECM Transmission] and [ECM Reception] must also be enabled. This function is not available with Internet Fax. Default: [Active] • Active • Inactive Report Print Settings • Print TX Status Report Sets the machine to print a transmission report automatically after a fax transmission. When the machine is in Immediate Transmission mode, the image of the original will not be reproduced on the report, even if [Error Only (Image Attached)] or [Every TX (Image Attached)] is selected. Note that if a memory error occurs for LAN-Fax transmission, a transmission report will always be printed regardless of this setting. The transmission report will be printed on A4 or Letter size paper. Default: [Every TX (Image Attached)] The default depends on the [Country] setting. • Error Only Prints a report when a transmission error occurs. 206