Ricoh SP C252SF Operating Instructions - Page 340

10. Troubleshooting Message Fax Job Memory Overflow Indep.Sply.Toner: X Internal Misfeed Memory Overflow Memory Overflow Causes Solutions The number of fax jobs in memory (unsent or unprinted faxes) has reached maximum, so new jobs cannot be stored. Wait until pending jobs have been transmitted or printed. A non-supported print cartridge is installed for the indicated color. Remove and replace it with a print cartridge specified by an authorized dealer. Paper has been jammed in the Remove the jammed paper. See page 306 machine. "Paper Feed Problems". • The data is too large or complex to print. • If you try to print a Locked Print file stored in the machine with the printer driver's [Gradation:] set to [Fine] in the [Print Quality] tab, printing may be canceled depending on the machine's current memory usage. • When performing printing on Legal size paper under certain print quality setting, print data becomes too large and the job may be canceled. • Select [600 x 600 1bit] in [Resolution] under [Printer Features] to reduce the size of data. See page 220 "Printer Features Settings". • Print or delete other Locked Print files in the machine, and then print the Locked Print file that the machine failed to print. Alternately, resend the Locked Print file to the machine with [Gradation:] set to [Speed] or [Standard], and then print the Locked Print file. • If using the PCL printer driver, set [Gradation:] in [Print Quality] to [Speed] or [Standard]. If using the PostScript 3 printer driver, set [Print Quality] in [Printer Features] to [Standard] or [High Quality]. • The machine's memory reached its capacity while scanning the first page of the original to store a fax job in memory before transmission. Resend the fax in parts as several smaller faxes, or send at a lower resolution. • The machine's memory reached its capacity while sending a fax via LAN-Fax. 338