Ricoh SP C252SF Operating Instructions - Page 228
Manual Config. Address, IP Not Ready
View all Ricoh SP C252SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
7. Configuring the Machine Using the Control Panel • IP Address Method Displays the IP address acquisition method. • IP Not Ready • DHCP • Manual Config. • Default IP IPv6 Configuration • IPv6 Select whether to enable or disable IPv6. Default: [Active] • Active • Inactive • DHCP Sets the machine to receive its IPv6 address from a DHCP server. Default: [Inactive] • Active • Inactive • IP Address (DHCP) Displays the IPv6 address obtained from a DHCP server. • Manual Config. Address • Manual Config. Address Specifies the machine's IPv6 address when DHCP is not used. Can contain up to 39 characters. For details about entering characters, see page 146 "Entering Characters". • Prefix Length Specifies the prefix length, using a value between 0 and 128. • Gateway Address Specifies the IPv6 address of the default gateway. Can contain up to 39 characters. For details about entering characters, see page 146 "Entering Characters". • Stateless Address Displays the IPv6 stateless addresses obtained from a Router Advertisement. • Stateless Address 1 • Stateless Address 2 226