Ricoh SP C252SF Operating Instructions - Page 231
PSTN / PBX, PBX Access Number, Function Priority, System Auto Reset Timer, Default: [On] 1 min.
View all Ricoh SP C252SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
Administrator Settings To configure this setting, contact your telephone company and select the setting based on your telephone line. Selecting a wrong setting may cause failures in fax transmissions. [Dial Phone (20PPS)] may not appear depending on the country setting of the machine. Default: [Push Phone] • Push Phone • Dial Phone (10PPS) • Dial Phone (20PPS) PSTN / PBX Sets the machine to connect to the public switched telephone network (PSTN) or a private branch exchange (PBX). Default: [PSTN] • PSTN • PBX PBX Access Number Specifies the dial number to access the outside line when the machine is connected to a PBX. Make sure that this setting matches the setting of your PBX. Otherwise, you may not be able to send faxes to outside destinations. Default: 9 • 0 to 999 Function Priority Specifies the mode that is activated when the power is turned on, or if the time specified for [System Auto Reset Timer] elapses without activity while the initial screen of the current mode is displayed. Default: [Copier] • Copier • Facsimile • Scanner System Auto Reset Timer Sets the machine to return to the mode specified in [Function Priority]. This setting is also applied to the timeout for copying the next document while ID card copy and manual 2-sided copy is performed. Default: [On] (1 min.) • On (30 sec., 1 min., 2 min., 3 min., 5 min., 10 min.) • Off 229