Sony STR-DN1080 Help Guide Printable PDF - Page 118
Setting the priority on the surround back speakers or Zone 2, speakers SURROUND BACK/ZONE2 Priority
View all Sony STR-DN1080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Monaural audio cable (not supplied) Speaker cable (not supplied) *1 For USA and Canadian models only *2 For other models After you have made the Zone 2 connection, set [SURROUND BACK/ZONE2 Priority] to [ZONE2 Terminals] in the [Speaker Settings] menu (for USA and Canadian models only). After you have made the Zone 2 connection, set [Surround Back Speaker Assign] to [Zone2] in the [Speaker Settings] menu (for other models only). Note After you have installed and connected your speakers, be sure to select the speaker pattern you want using [Speaker Pattern] in the [Speaker Settings] menu. You can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does not have surround back and height/overhead speakers. Only audio signals from [USB], [Bluetooth] (while in BLUETOOTH RX mode only), [Home Network], [Music Service List], [FM TUNER] and audio signals input from AUDIO IN jacks are output to the Zone 2 speakers. External digital input from OPTICAL IN, COAXIAL IN and HDMI IN jacks cannot be output to Zone 2. [118] Using the Multi-Zone Features Enjoying sound from speakers located in another room (Zone 2) Setting the priority on the surround back speakers or Zone 2 speakers (SURROUND BACK/ZONE2 Priority) (for USA and Canadian models only) When speakers are connected to both the SPEAKERS SURROUND BACK/HEIGHT terminals and SPEAKERS ZONE 2 terminals, you can set which speakers are given priority. 1 Select [Setup] - [Speaker Settings] from the home menu.