Sony STR-DN1080 Help Guide Printable PDF - Page 151

3 Select [Continue]. 4 Select the speaker you want from the list. The position of the speaker and the corresponding terminals on the receiver to which the speaker should be connected are shown on the screen. Note When connecting speaker cables, etc., be sure to disconnect the AC power cord (mains lead). [166] Adjusting Settings Speaker Settings Setting the priority on the surround back speakers or Zone 2 speakers (SURROUND BACK/ZONE2 Priority) (for USA and Canadian models only) When speakers are connected to both the SPEAKERS SURROUND BACK/HEIGHT terminals and SPEAKERS ZONE 2 terminals, you can set which speakers are given priority. 1 Select [Setup] - [Speaker Settings] from the home menu. 2 Select [SURROUND BACK/ZONE2 Priority]. 3 Select the setting you want. ZONE2 Terminals: Priority is placed on the SPEAKERS ZONE 2 terminals. SURROUND BACK Terminals: Priority is placed on the SPEAKERS SURROUND BACK/HEIGHT terminals and the SPEAKERS ZONE 2 terminals are disabled. Note When [Zone2 Power] is set to [Off], the SPEAKERS SURROUND BACK/HEIGHT terminals are enabled even if [ZONE2 Terminals] is selected. When [ZONE2 Terminals] is selected and [Zone2 Power] is set to [On], [Zone2 Power] will be set to [Off] automatically if the [Speaker Pattern] is set to [5.0] or higher.