Sony STR-DN1080 Help Guide Printable PDF - Page 208

The types and number of devices that can be controlled by the "BRAVIA" Sync feature are restricted by the HDMI CEC standard as follows: Recording devices (Blu-ray Disc recorders, DVD recorders, etc.): up to 3 devices Playback devices (Blu-ray Disc players, DVD players, etc.): up to 3 devices Tuner-related devices: up to 4 devices Audio system (receiver/headphones): up to 1 device (used by this receiver) [298] Troubleshooting "BRAVIA" Sync (Control for HDMI) TV sound cannot be heard from the speakers connected to the receiver. Make sure [Control for HDMI] is set to [On] in the [HDMI Settings] menu. Make sure [Input Mode] for the TV input is set to [Auto] in the [Input Settings] menu. Make sure your TV supports the Audio Return Channel (ARC) function. Make sure that the HDMI input of your TV is labeled "ARC." If your TV has multiple HDMI input jacks, make sure the receiver is connected to the one supports the Audio Return Channel (ARC) function. Make sure your TV is connected to the HDMI OUT A (TV) jack of the receiver. Make sure the HDMI OUT setting is set to [HDMI A] or [HDMI A + B]. [299] Troubleshooting Remote control The remote control does not function. Point the remote control at the remote control sensor on the receiver. Remove any obstructions between the remote control and the receiver. Replace both of the batteries in the remote control with new ones if they are weak. [300] Troubleshooting If the problem is not solved Reverting to the factory default settings You can clear all memorized settings and restore the receiver to the factory default settings by the following procedure. This procedure can also be used to initialize the receiver before you use it for the first time. Be sure to use the buttons on the receiver to perform this operation. 1 Turn off the receiver. 2 Hold down (power) on the receiver for 5 seconds. [CLEARING] flashes on the display panel for a while, then changes to [CLEARED !].