Sony STR-DN1080 Help Guide Printable PDF - Page 89

Note This function does not work in the following cases: Headphones are connected. [Bluetooth Mode] is set to [Transmitter]. [Pure Direct] is set to [On]. The Wireless Multi-Room function is activated. [DSD Native] is set to [On] and DSD signals are being played back. This function does not work if you select a sound field other than the following: 2ch Stereo Multi Ch Stereo This function does not work when [Direct] is being used and analog input is selected. This function may not work depending on the audio format. The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals depending on the audio format. Hint You can also select [In-Ceiling Speaker Mode] in [Sound Effects] from the home menu. To obtain the optimal sound for your listening environment, configure the [Ceiling Height] setting in the [Speaker Settings] menu, then perform Auto Calibration. [81] Enjoying Video and Sound Enjoying sound effects Enjoying high-fidelity sound (Pure Direct) You can enjoy higher-fidelity sound from all inputs using the Pure Direct function. When the Pure Direct function is on, the display panel lights off to suppress noise that affects sound quality. 1 Select [Sound Effects] - [Pure Direct] from the home menu. 2 Select [On]. Canceling Pure Direct The Pure Direct function will be canceled when you perform the following: Select [Off] in step 2. Press PURE DIRECT on the receiver. Change the sound field. Change the scene setting on the TV (Scene Select). Change the setting of [Automatic Phase Matching], [Calibration Type] or [Equalizer] in the [Speaker Settings] menu. Change the setting of [Sound Optimizer], [In-Ceiling Speaker Mode] or [Dynamic Range Compressor] in the [Audio Settings] menu.