Sony STR-DN1080 Help Guide Printable PDF - Page 137

[147] Using Other Features Viewing information on the display panel The display panel provides various information on the status of the receiver, such as the sound field. 1 Select the input for which you want to check information. 2 Press DISPLAY MODE on the receiver repeatedly. Each time you press DISPLAY MODE, the display will change cyclically as follows: Index name of the input (*1) - Input you selected - Sound field currently applied (*2) - Volume level - Stream information (*3) When listening to FM radio Preset station name (*1) - Frequency - Sound field currently applied (*2) - Volume level When receiving RDS broadcasts (for European and Asia-Pacific models only) Program service name or preset station name (*1) - Frequency, band and preset number - Sound field currently applied (*2) - Volume level *1 Index name appears only when you have assigned one to the input or preset station. Index name does not appear if only blank spaces have been entered or it is same as the input name. *2 [PURE.DIRECT] appears on the display panel when the Pure Direct function is activated. *3 Stream information may not be displayed. Note Characters or marks in some languages may not be displayed. [148] Adjusting Settings Easy Setup Setting up the receiver using Easy Setup When you turn on the receiver for the first time or after the receiver is initialized, the Easy Setup screen appears on the TV screen. You can set up the following settings for the receiver by following the instructions on the Easy Setup screen. Select your language (for USA, Canadian, European and Australian models only) Select the language of messages on the screen. Speaker Settings Check your speaker system and perform automatic calibration according to the configuration and arrangement of your speaker system. Internet Settings Select the network connection method and configure settings to connect the receiver to the network.